Topic Replies Activity
How to use command-line flow (IceStorm or Cloud Synth)

Hi all, I’m going to briefly describe how to flash the device using our command-line flasher in conjunction with cloud-synthesis or a local IceStorm installation. (You can also use the flasher tool with the official iCE…

22 October 16, 2019
Linux udev Rules

Hi all, For Linux support, you need to add a udev rule for read/write permission for the USB device. # Store the file here: # /etc/udev/rules.d/60-webfpga.rules # # Run this command to reload the udev rules without r…

4 September 22, 2019
About the Support category 1 July 5, 2019
Closeup photo of unit with breadboard pin headers soldered on? 3 October 22, 2019
Windows Supported? 9 September 17, 2019
Are you sure about the breadboard pin layout? 3 September 5, 2019
Command line build under windows 4 September 4, 2019
Current limits for User FPGA pins 9 August 27, 2019
Tools location, and a Chromium programming issue 3 August 11, 2019