Topic Replies Activity
How to use command-line flow (IceStorm or Cloud Synth)

Hi all, I’m going to briefly describe how to flash the device using our command-line flasher in conjunction with cloud-synthesis or a local IceStorm installation. (You can also use the flasher tool with the official iCE…

19 August 14, 2019
WF_XXX Internal Pin Aliases

These are FPGA chip pins that are wired directly to certain peripherals. For example, the LED is always wired to FPGA pin 31. These FPGA pins are not the same as the external physical PCB pins! If you are using an exter…

2 August 13, 2019
Linux udev Rules

Hi all, For Linux support, you need to add a udev rule for read/write permission for the USB device. # Store the file here: # /etc/udev/rules.d/60-webfpga.rules # # Run this command to reload the udev rules without r…

2 August 11, 2019
Generating or using a reset signal 4 August 20, 2019
FPGA board pinout (ShataPlus) 1 August 15, 2019
Verilog Demo Connections for the Kit 1 August 7, 2019
Tools location, and a Chromium programming issue 3 August 11, 2019
FPGA as a "host" or a peripheral device? 4 August 7, 2019
Arduino Adapter Board 7 July 9, 2019
WebFPGA Forum Launch 1 July 5, 2019